Get up to4 free estimates
for ANY type of Contractor near you
- No Obligations
- Stop Paying Too Much For Your Contractor
- No Spam Calling
- Screened & ID Checked Contractors only!
In our garage door insulation guide you will find all the needed materials, cost of materials and best DIY tips for the job!
An uninsulated garage will cost you a lot of money during the winter and summer months. This is due to energy loss that occurs when a large area is not insulated properly. High cost is what keeps people away from getting their insulation done properly, but with a DIY project the cost goes down dramatically. You gain a lot of advantages from the install, and the best part is that it isn’t a huge time commitment. If done right, any remaining materials can be used to insulate other parts of the home. So this is the one project that is worth the effort to get right the first time.
On most homes, the garage door is a big part of the design. It is the biggest part of your home when it is in the front, but beyond the design it has an important purpose. This is the largest opening to your home, so just like a front door, you want to make sure it is functioning properly. Weak garage doors and insulation make your entire house vulnerable, with the biggest problem being the air that passes through. You’re air conditioning unit will work overtime to keep a set temperature, fighting the weak garage door that is constantly changing the home environment. Having a competent garage door insulation is a necessary barrier to keep you’re a/c costs down.
The only thing that will really set you back is the quality of the material you use for insulation. This will be your biggest cost or lowest based on what you purchase upfront. Not a lot of tools/materials are needed, and you can count on some leftover materials being useful for other projects. No matter the scale of this DIY garage door insulation, it doesn’t become more complicated even with larger installs.
Insulation Panels – You can go with any type that you feel is the best for this portion. Remember that whatever panels you choose, this will be what stands between your garage door and air getting in your home. Out of all the materials listed, this is the one where that should have the most money invested in it.
Retainer Clips – They are poplar enough that you can often find them by the name “Garage Door Insulation Retainer Clip” or other variations with that same format. You won’t get the wrong clip by not getting this specific type, but it helps so that you don’t have to guess whether the clip can be used for insulation.
Double-Stick Adhesive – There are plenty of popular brands that stand out here. Even Gorilla Glue has made their own double-stick adhesives. The only thing that matters is that the product is strong, reliable and can hold up for years at a time.
Straightedge/Tape Measure – You’ll need both for measuring, but nothing too fancy. They’ll get the job done as long as they get the numbers right.
Respirator Mask/Rubber Gloves – When working around areas that are susceptible to mold and dirt, these protective materials work the best. It is important to not skip out on wearing protection while doing this project.
Utility Knife – There will be a lot of precise cutting, so choose something that is comfortable. It also helps if the blades are sharp or removable. Length doesn’t really matter unless you plan on using thick material.
Once you have all of the materials and a solid plan, installing the insulation is just a matter of following simple directions. More patience than skill is required to finish this project, with repetitious tasks being the biggest pain. You can cut down on work time by getting the garage door measurements right. This is the biggest problem for a lot of users, and it often leads to wasted time. While you’re doing measurements, check for other problems. A bigger issue with your garage door may require your attention before moving forward with the project.
Measure the height and the width of your garage door panel to get accurate numbers for the retainer clips. They will be placed at each mark you put on the panel, so make sure that everything matches up. Larger panels will need more than one retainer clip, so make adjustments as you go along. It is better to have more than less in this case, so starting out with a lot of retainer clips is helpful. The next step is to cut the insulation in the sizes, using the numbers collected from the panel measurements. Make sure to add a few inches to the height/width of your original numbers so that it fits better. You don’t need to go too crazy with this, it is just about getting the sizing right.
Now comes the tedious part; put the insulation into the garage door panel, and then secure it with the retainer clip. Use your utility knife to poke a hole in the insulation so that the retainer clip isn’t a hassle when locking. The utility knife from the materials list will do the job just fine, but some users prefer using different tools for this part of the job. Either way will work fine, and it doesn’t matter what you poke holes with. Continue to do this until your garage door is complete insulated from top to bottom.
The steps for installing the insulation is simple enough, so why do a lot of people have problems with the project? It all boils down to getting the measurements right so that you don’t have to backtrack and redo specific parts of the project.
You’re going to spend hundreds of dollars less on this project by doing it yourself. Make sure to place a priority on insulation materials above everything else. Bad material will make the job a failure before it even starts.
Insulation Panels can be purchased by themselves or in a kit. Both options are relatively inexpensive even when going for the high grade materials. For smaller garage doors, a kit is preferred since it will be the better value. $12-$60
Retainer Clips can be purchased separately or together in a package, with the former being the most common. Since you don’t know how many retainer clips you’ll need, do the measurements before making a purchase. That way you can buy the individual clips and get a better deal. It isn’t uncommon for the retainer clips to end up being a higher cost than the insulation panels. $1.40-$10
You can go in any direction with the double-stick adhesive, but don’t completely ignore brand names. They are tougher than generic brands and handle insulation better if it has a little extra weight. $2-$15
A straightedge and Tape Measure are the tools you will use to accurately measure the garage door and insulation. There is no need to spend big money here, but make sure that both items fit your needs. Bad measurements will derail the entire project and waste your time. $5-$30
Due to the environment you’ll be in, using a Respirator Mask and Rubber Gloves is highly recommended. Fortunately, the bare minimum will do as long as it protects the user. $2-$10
The last thing you’ll need is a utility knife. Precision cuts are necessary to make use of the measurements made at the beginning of the project. So sharpness and comfort are the two things you’re looking for. To spend less money, you can always get a utility knife packaged with plenty of removable blades. $7-$20
Most homes will are fitted with fiberglass, foam, polystyrene foam or reflective foil. They rank as the most used insulation materials, although foil is more likely in older homes. Reflective foil is the cheapest, and is sold in rolls. The downside is that it looks bad compared to the other materials. Polystyrene foam is rigid and tough to deal with when cutting. But is it is also fantastic with insulation, having few equals among the other materials. Foam hybrids and fiberglass are the last two, and they both are solid choices. In modern times, foam hybrids and polystyrene foam are the most purchased materials for garage door insulation.
Yes, although larger garage doors will take time. To keep from getting burned out during the project, you should break it up into two or three days. One day for measurements and cutting, and the other days for applying the insulation. The break in-between measurements will give you more than enough time to figure out what type of insulation material works best for the project.